Three Energy-saving Functions Of Stainless Steel Ball Valves

At present, there are many types of 2 Piece Threaded Ball Valve, but its working principle is to realize the opening and closing of stainless steel ball valves and adjust the medium through various mechanisms. There are mainly three energy-saving functions.

1. Quickly discharge the condensed water generated by the equipment to keep the heating efficiency of the equipment in a good state, prevent the condensed water in the equipment from being retained, and ensure the steam space in the equipment. Always maintain a high heating efficiency.

2. Reduce the steam consumption of the stainless steel ball valve itself. The so-called steam consumption of the stainless steel ball valve itself generally refers to the steam leakage, which is the sum of the steam required for the operation of the stainless steel ball valve and the heat loss. If the stainless steel ball valve cannot completely intercept the condensed water, it will not only have a significant impact on the steam performance of the equipment, but may even completely paralyze the production equipment.

3. Quickly discharge the air and low-temperature condensed water in the device at startup to shorten the preheating operation time. When the steam is started, the steam supply pipeline and steam-using equipment are full of air, and steam cannot be supplied unless they are removed.

In addition, the initial cold condensed water generated by the equipment during the heating to the steam temperature must also be quickly discharged. This will enable the equipment to operate normally in a short time. Improvement of production efficiency, especially in intermittent production, can shorten the preheating time, shorten the operation time of each process, and increase the number of processes to increase output.