The Water Inlet Method Of The One-piece Ball Valve Must Meet The Requirements Of The Water Inlet Ball Valve

The name and function of each department, in the water inlet method of 1 Piece Ball Valve, meet the requirements of the water inlet ball valve. Position-related entry into the three-way side port, some maintenance filters, as the relevant names of aperture and flow, removal of rust materials, normal operation of low-pressure switches and related power supplies, increase the use of ball valve products.

Material basis In the low-pressure switch, the power is turned on. When the one-piece ball valve is in normal operation, the water pressure will sound an alarm when the power is cut off. When the tap water pressure reaches 5-8kg/cm2 to meet the needs, many activated carbon filters and odor elimination, other materials and cotton filters, the aperture will be filtered, and the fine particles produced by shedding are all a basis of the material.

Apply the connection of the water inlet solenoid valve and the power supply, after the water inlet and the normal mechanism are stopped, some tissue water passes through the way, the one-piece ball valve and the two-piece ball valve for road drainage are the corresponding machines in the transparent mode.