Cleaning Method Of Stainless Steel Three-piece Ball Valve

The stainless steel three-piece ball valve is a valve that has been widely used in recent years. It is a relatively new type of ball valve. It has some advantages unique to its own structure, such as frictionless switching, seals that are not easy to wear, and small opening and closing torque.
The stainless steel three-piece ball valve is widely used in petroleum, chemical and other strict cutting work, and its sealing surface and spherical surface are often in a closed state and will not be eroded by the medium. The three-piece internal thread ball valve only needs to be rotated 90 degrees and a very small torque to close tightly. In addition, the ball valve body can be integral or combined.

3 Piece Ball Valve requires professional personnel to be responsible. It is necessary to check once every time you go to work, and regularly open the plugs at the bottom of the flushing valve and the drain valve for flushing. If necessary, it is also necessary to regularly disassemble and flush to prevent the valve from being blocked by dirt.

The surface of the stainless steel three-piece ball valve, the trapezoidal threads on the valve stem and the valve stem nut, the sliding part of the level gauge valve stem nut and the bracket, and the gears, worm gears and other parts are prone to accumulate a lot of dust. Oil stains, media residues and other dirt will cause wear and corrosion to the valve. Therefore, it is important to always keep the valve exterior and moving parts clean and protect the integrity of the valve paint.